Can the same row hold both tube and sheet packs?

Yes, if each material has suitable support and a verified loading arrangement. Tube may require retention features, while sheet packs need support that limits bending. Separate levels or bays can keep unlike handling requirements from conflicting. For West Side production stores, separate sheet inputs from tube feeding fabrication when their picking differs.

How do I specify capacity when bundle weights vary?

Use the heaviest intended load for each position. Provide its dimensions and weight distribution, not just an average inventory weight. Arm ratings, upright loading, and the complete configuration must agree with that loading plan. North Monroe furniture work should distinguish dense hardware bundles from lighter long production inputs.

Will my existing forklift work with long bar stock?

Possibly; confirm it against the loaded travel path. Fork length, load center, turning envelope, and available lift height all matter. A truck that handles pallets comfortably may need substantially more room with a long bundle. Include the turn from receiving into the legacy factory layout rather than checking only the storage aisle.

Can arm elevations change after installation?

Yes, within the system’s approved configurations and ratings. Review revised loads and spacing before moving arms, and unload affected positions first. A change that creates more openings does not automatically preserve the original capacity. In close-in Grand Rapids manufacturing space, revised levels must still leave the loaded withdrawal path usable.

Grand Rapids, Michigan

Cantilever Rack in Grand Rapids, MI

Cantilever rack gives Grand Rapids operations an open loading face for material that extends beyond a standard pallet. Arms project from uprights without front columns, allowing bar, pipe, tube, lumber, and sheet bundles to enter from the aisle without threading between posts.

Instead of treating every long item as the same load, we separate bundle weights, lengths, and picking methods. A furniture component picked by hand needs a different arrangement from bundled steel moved by forklift. Cantilever racking makes those differences part of the specification rather than a problem for the operator.

(616) 344-5683

Why cantilever rack suits mixed production stock

Access matters when a saw or fabrication cell needs one length from several choices. Open faces let operators approach the selected bundle directly. Selective pallet rack remains useful for palletized cartons and components; its front columns and beam openings can make long, unpalletized stock awkward to position.

A single-sided row can place material along a perimeter, while a double-sided row serves two aisles from a central location. Neither arrangement should be selected from a position count alone. Include the full load projection, handling path, and space needed to remove an entire bundle.

Open-front access for long loads

Arm ratings tied to actual bundle weight

Wall-side or two-face layouts

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

Working around legacy factory space

North Monroe and the West Side industrial district include legacy factories where existing columns and door locations deserve an early survey. For furniture production, locating lumber near cutting equipment can reduce cross-traffic, but the route must still accommodate full lengths. Connections through US-131, I-196, and I-96 inform receiving patterns rather than determine rack dimensions.

Furniture component production

Metal fabrication and maintenance stores

Industrial material distribution

How cantilever racking is matched to the load

We turn the material list into a drawing and component schedule, checking these four relationships before an order is placed.

Measure the bundle envelope

Record maximum length, width, height, and weight, including packaging. Separate loose pieces from banded bundles so support and handling assumptions remain visible.

Choose supporting arms

Set arm length to the load depth and check rated capacity against the weight each arm supports. Uneven weight distribution needs attention beyond simply dividing total pounds.

Locate each upright

Use material stiffness and length to determine support spacing. Sheet packs and slender tube may need different support patterns even when their overall weights are similar.

Check the travel path

Compare forklift turning requirements or side-loader travel with the longest bundle. Verify entry angles, lift height, and clearance for withdrawing material without contacting neighboring stock.

Cantilever storage rack details for daily use

Indoor storage keeps production stock near its point of use; an outdoor arrangement requires a discussion of exposure, finish, drainage, and the condition of incoming bundles. Winter loading exposure can affect handling at the doorway even when the storage row itself is indoors.

New material is supplied for these systems. The proposal identifies uprights, bases, arms, bracing, and attachments, with capacities and elevations coordinated to the drawing. Experienced installation crews we schedule and manage assemble the system, align the rows, and set the specified arm positions.

Grand Rapids service overview Long-material system overview Compare gravity-fed pallet lanes Review deep-lane pallet storage

Mixed lengths needing individual access

Sheet bundles with planned support points

Long stock separated from pallet inventory

Call (616) 344-5683

Recent Installations

Racking projects completed for warehouses across West Michigan.

View More Projects

Talk through your material mix

Send bundle measurements, equipment details, and a floor sketch for a practical discussion of cantilever rack options. As a division of Warehouse Equipment & Supplies Co., we have been supplying and installing storage systems since 1997. We can compare a perimeter row with an island before you choose a layout. (616) 344-5683.