Where should the longest bundles be assigned?

Choose locations with adequate support and a verified withdrawal path. The easiest-looking position near a row end may be unsuitable if the load must swing into active pallet traffic. A Three Mile Road building-products layout should keep that swing clear of shared freight transfer.

Can a Walker warehouse mix indoor and yard storage?

Yes, as a planning approach, but specify each environment separately. Match exposure protection and material suitability to the location, and check the handling route between the two areas. Wilson Ave receiving needs a defined transition between weather-exposed packs and indoor picking.

Why measure the depth of a lumber pack?

Depth determines how far the load rests along the arms and affects capacity selection. Length alone cannot establish the required projection or confirm that a proposed arm supports the bundle correctly. For Walker order assembly, include the depth of partial lumber packs returned after picking.

What happens before installation areas are released?

Confirm the agreed layout, working boundaries, and relocation of material occupying the footprint. Coordinate receiving access with the installation sequence so the crews have a defined work area and warehouse staff understand the temporary routes. At Walker Industrial Park, identify the temporary route for mixed freight before releasing the storage footprint.

Walker, Michigan

Cantilever Rack in Walker, MI

Cantilever rack helps Walker building-product operations store long material without forcing it into standard pallet openings. Arms extend from uprights and leave the loading side without front columns, giving a forklift access across the length of a supported bundle.

The challenge is preserving room to handle that bundle after it leaves storage. We review the load, the truck, and the receiving connection together. A cantilever storage rack should provide an intentional location for long stock while leaving neighboring pallet movements workable.

(616) 344-5683

Cantilever rack details for shared warehouse travel

A single-sided row needs an accessible face and enough room for its base; a double-sided row needs operating space along both faces. We compare their complete layouts rather than treating a second set of arms as an automatic gain. Row ends deserve particular attention where long loads turn toward staging.

Indoor use and outdoor use involve different exposure considerations. Specify an appropriate finish and components for the intended setting, review the supporting surface, and decide whether the stored material needs weather protection. An exterior location should not be selected solely because it appears vacant on a sketch.

Area services Long-load systems Gravity pallet storage Deep-lane alternatives

Overlength products beyond standard bay openings

Long bundles stored near palletized merchandise

Call (616) 344-5683

How cantilever racking is matched to building products

The most useful measurements describe what staff handle, not just what arrives from a supplier. We use four checks to establish the storage arrangement.

Document the working bundle

Capture width, depth, length, and maximum weight for received packs and returned partial quantities. Identify packaging or dunnage that changes the supported depth or fork entry.

Set arm length and loading limits

Choose projection to support the load depth and confirm arm capacity under the planned load placement. Evaluate column and base loading across the proposed levels rather than assuming unused arms increase the rating.

Place support points deliberately

Long bar, pipe, tube, lumber, and sheet loads require support suited to their stiffness. Sheet material may need specified decking, while flexible lengths can require closer upright spacing to control sag.

Validate equipment fit

Check the loaded forklift turning envelope, mast reach, and fork withdrawal. If a side-loader is considered, use its actual dimensions and placement motion to establish the aisle instead of applying a generic allowance.

Why cantilever rack complements selective storage

Selective rack serves pallet loads well when the pallet carries the material across its supporting beams. Long building products can exceed those bay openings or need access across several supports. Open arms address that problem while leaving conventional pallet positions available for packaged goods.

For Walker planning, we also ask where picked lengths go next. A direct route to order assembly can be more useful than an extra level that complicates withdrawal. Storage density has little value when the load cannot be removed without blocking another working aisle.

Review bundle swing at every row end.

Keep long-load staging separate from pallet transfer.

Check cumulative loading before adding arm levels.

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

Wilson Avenue lengths and industrial circulation

For a building-product operation near Wilson Ave, open-arm storage deserves a review against the material being handled. Walker Industrial Park and the Three Mile Road industrial area also frame discussions about building products moving beside other freight. Where receiving serves mixed material, a dedicated long-load approach can keep pipe or lumber withdrawal out of pallet transfer paths. These local references guide the questions we ask; actual door positions, truck dimensions, and available clearances still determine the design.

Building-product distribution

Mixed consumer-goods handling

Warehouse order preparation

Recent Installations

Racking projects completed for warehouses across West Michigan.

View More Projects

Put the load path into your request

Grand Rapids Pallet Rack, supplying and installing since 1997, is a division of Warehouse Equipment & Supplies Co. We coordinate and manage experienced installation crews rather than leaving installation sequencing unresolved. For a cantilever rack review, share a floor sketch and load information, then call (616) 344-5683 to discuss the operating assumptions. (616) 344-5683.