Can one row hold both lumber and steel?

Yes, if each material has suitable support and assigned capacity. Separate load families where their depths, weights or handling methods differ; an arm arrangement chosen for boards should not be assumed suitable for concentrated steel bundles. For 84th Street building supply, identify which packs feed order assembly and which remain reserve stock.

Should a Byron Center warehouse use all its clear height?

No. Reach, lifting clearance and upright capacity set practical limits. Taller space can allow more elevations, but only after checking the truck and the loads at the highest intended position. This is especially relevant when evaluating newer space near the M-6 and US-131 corridor.

Is outdoor storage an option?

Yes, when the system specification and stored material suit outdoor exposure. Include surface conditions and winter handling in the review, and identify which products need covered storage instead. Byron Center receiving should separate wet incoming packs from material intended for covered storage.

What information helps establish arm capacity?

Maximum bundle weight, depth and support distribution are the starting points. Include the number of arms carrying each load and any uneven contact so the proposed arrangement can be evaluated as a whole. For South Beltline material handling, describe the load after a supplier bundle has been opened.

Byron Center, Michigan

Cantilever Rack in Byron Center, MI

Cantilever rack in Byron Center gives building-supply lengths a defined storage face instead of leaving bundles across receiving floors. Arms project from upright columns, so there are no front columns interrupting access to lumber, pipe, tube or bar. That open face helps a lift truck approach long material without threading the load between conventional pallet-bay posts.

For a newer warehouse near M-6 and US-131, available height is only one part of the decision. We start with bundle weight, stock length and the truck that will handle it. Grand Rapids Pallet Rack operates as a division of Warehouse Equipment & Supplies Co., which has supplied and installed storage systems since 1997.

(616) 344-5683

Size Cantilever Rack Around the Bundle

Arm length should accommodate the actual load depth, including irregular packaging, without treating extra projection as extra capacity. Arm ratings depend on the specified loading conditions; a bundle resting unevenly across supports changes the demand on each arm. Upright spacing also matters because long pieces can bend between supports even when the total bundle weight appears acceptable.

Single-sided rows can place the working face along a perimeter, while double-sided arrangements provide access from two aisles around a shared column line. Account for the bases in either layout. A drawing should show the longest load turning into position, not just the rack footprint. Selective pallet rack can remain beside this area for boxed goods and standard pallet loads.

Byron Center storage services See long-load systems Byron Center gravity-fed pallets Byron Center deep-lane reserves

Mixed lumber and trim lengths

Pipe bundles with repeat retrieval

Long profiles stored beside pallet goods

Call (616) 344-5683

Plan Cantilever Racking From Receiving to Retrieval

Measure representative stock

Record the shortest loose pieces as well as the longest bundles. Include maximum weights, load depths and how straps or packaging affect support contact.

Assign support positions

Choose arm elevations and upright spacing around the material family. Keep enough vertical room for forks to lift a bundle free before withdrawal.

Check handling equipment

Compare forklift turning movement with side-loader travel where long loads dominate. Equipment dimensions and load orientation determine which aisle arrangement deserves space on the plan.

Coordinate the installation

We schedule and manage experienced installation crews around an agreed work area. Receiving access, material staging and the sequence for opening storage faces are discussed before work begins.

Where Cantilever Storage Rack Fits the Mix

Building suppliers often carry lengths that do not share one pallet footprint. Separating those materials by profile and length can make individual bundles accessible without moving unrelated stock. The open-front arrangement is useful for bulky sheet packs too, provided their support requirements are reviewed rather than assumed to match lumber.

Indoor placement can keep moisture-sensitive material under cover. An outdoor arrangement needs components and a finish selected for the exposure, alongside a handling plan for weather-affected loads. Neither location removes the need to confirm capacity at the arm and upright level. Avoid filling every elevation merely because the building offers room above the current inventory.

Open access for uneven stock lengths

Arm spacing based on material support

Layouts evaluated with actual truck dimensions

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

Building Supply Along the South Beltline

Along the 84th Street industrial corridor, building-supply receiving needs room to separate incoming lengths before putting them away. In newer 28–32-plus-foot buildings around Byron Center and neighboring Gaines Township, extra height should be evaluated against truck reach and product stability rather than automatically filled with arms. M-6 delivery access does not eliminate dock conflicts. During local winters, review unloading space, snow storage and the route between the trailer and assigned installation area before confirming delivery arrangements.

Building-supply distribution

Light manufacturing support

Automotive aftermarket materials

Recent Installations

Racking projects completed for warehouses across West Michigan.

View More Projects

Bring Your Longest and Heaviest Examples

Share stock measurements, bundle weights, a floor sketch and lift-truck details. We can discuss a cantilever rack layout alongside your pallet storage, with access and support decisions visible before equipment is selected. (616) 344-5683.