Can short remnants share a level with full lengths?

Only when both lengths have adequate support. Establish a separate remnant position if a short piece would bridge too few arms or disappear behind full bundles. For specialty assembly near Spaulding Ave, allocate remnants apart from the full profiles feeding the next shift.

What determines whether sheet material needs decking?

Sheet stiffness, stack weight, and the acceptable span govern that decision. Describe whether sheets remain bundled or are selected individually so the support arrangement reflects actual handling. At a Fulton Street East production site, include the sheet condition after individual picks in that review.

Should an Ada operation choose one face or two?

Compare access demand with available circulation space. Two usable faces may help separate material families, but not if the second aisle displaces a required production route. Keep the Spaulding assembly replenishment route available when comparing the second storage face.

Can arm heights change after installation?

Adjustments may be possible within the specified system. Confirm the revised load arrangement and column limits before moving arms; a convenient new elevation is not proof of adequate capacity. For multi-shift Ada production, update the location plan before another crew assigns stock to changed levels.

Ada, Michigan

Cantilever Rack in Ada, MI

Cantilever rack gives Ada operations a defined home for manufacturing profiles without treating every load as a pallet. Arms attach to upright columns, leaving the loading face free of front columns so a long bundle can approach across its full length.

The useful question is not simply how many levels will fit. We examine the material resting on each arm, the space required to withdraw it, and the handling route back to production. A cantilever storage rack should make those movements predictable rather than move floor congestion somewhere else.

(616) 344-5683

Why cantilever rack suits profile storage

Long bar, pipe, tube, lumber, and sheet loads place different demands on support spacing. Thin sheet may need an approved support surface, while flexible profiles can require closer upright centers. Material stiffness matters alongside bundle weight; more open space between supports is not automatically useful capacity.

Selective pallet rack remains appropriate for finished goods on sound pallets. Its beam-defined bays can obstruct an overlength load that needs lateral entry. Keeping pallet storage and open-arm storage as separate zones lets each system serve the load it was intended to carry.

Support intervals follow the shortest flexible material.

Level clearance includes forks and lifting movement.

Separate long-stock picking from finished-pallet travel.

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

Ada production routes deserve their own review

Along Fulton Street East and within the Spaulding Ave industrial area, light manufacturing and specialty assembly provide a useful planning context. Profiles feeding assembly should be accessible without crossing finished-pallet staging. For an Ada layout, we would examine where material enters, where remnants return, and whether another shift needs the same face. That review connects arm elevations and row orientation to the production task rather than to an assumed building footprint.

Light manufacturing profiles

Specialty assembly inputs

Consumer-product support materials

How cantilever racking is planned

We start with representative loads, including the awkward exceptions that operators otherwise leave beside a rack. Four checks establish the working arrangement before component selection.

Record the load envelope

Measure maximum bundle width, length, depth, and weight, plus any packaging that changes fork entry. Include partly used bundles because loose pieces may behave differently from strapped material.

Match arms to support needs

Arm length must accommodate the supported load depth. Check capacity at the specified load position, then verify upright and base ratings rather than multiplying an arm rating into a presumed system rating.

Choose the accessible faces

A single-sided arrangement can serve a perimeter position; a double-sided arrangement needs working aisles on both faces. Compare the entire occupied footprint, including bases and approach space.

Test the handling movement

Use the actual forklift dimensions and load swing to review access. A side-loader changes the travel envelope, but its platform, reach, and load placement still need checking against the proposed arms.

Cantilever rack details for a clear handover

Indoor storage protects moisture-sensitive stock; outdoor applications require a finish and components selected for exposure. We also examine the operating surface and how weather affects the material itself. Moving a design outside is a specification change, not merely a different row location.

Grand Rapids Pallet Rack is a division of Warehouse Equipment & Supplies Co., supplying and installing since 1997. We coordinate experienced installation crews, review the planned arm elevations with them, and manage the installation sequence around agreed working areas. Capacity information and the final arrangement belong in the handover.

Area services Long-load systems Gravity pallet storage Deep-lane alternatives

Mixed-length bundles needing direct selection

Long components beside palletized finished goods

Call (616) 344-5683

Recent Installations

Racking projects completed for warehouses across West Michigan.

View More Projects

Bring the difficult bundle to the discussion

Share load measurements, photographs, and truck information when requesting a cantilever rack review. We can discuss which assumptions need confirmation and distinguish storage capacity from the clearance required to use it. Call (616) 344-5683 to begin with the materials that give your operators the most trouble. (616) 344-5683.